Archive | LED RSS feed for this section
LEDcure SZ and VZ: New high performance UV LED systems

LEDcure SZ and VZ: New high performance UV LED systems

Integration Technology launches two new high performance air-cooled UV LED units. Oxon, 26th of October 2016: Integration Technology Ltd (ITL) has announced two new high performance air-cooled UV LED  systems; the SZ and VZ LEDcure models. Specifically designed to meet the high specifications of wide format and industrial inkjet printing, the new LED products share a common com pact head architecture. Just 70mm wide x 200mm high, the SZ and VZ models come in a range of standard lengths from 90mm to 540mm long to suit all printer models which can be fine-tuned using 30mm modules to match the print head array. Outside of these longer lengths are also possible […]

XT8 UV LED Booster

XT8: New LED UV Booster Technology

Integration Technology pushes performance of UV LED arrays up to 30%. Oxon, 11th of October 2016: All new LED UV systems from Integration Technology Ltd (ITL) will be extended with the innovative XT8 boost technology as standard. The newly developed UV LED Booster XT8 delivers an increase in UV power of up to 30%, while maintaining a higher efficiency since there is less input power required to run the LED chips. ITL is now rolling out the technology in all LED UV systems which will take them to market leading levels of performance. With XT8 UV LED Booster technology, the system reaches an extremely high output and dose which greatly […]

ITL launches it’s smallest air-cooled UV LED curing system

UK UV developer Integration Technology Ltd (ITL) has introduced an air-cooled LED curing system with class leading size-to-power ratio making it the most compact on the market. Measuring just 86mm long x 54mm wide x 79mm high, the MZero LED has a cure length of 30mm and generates > 4W/cm² centred around 395nm. It utilises all of the proven features and benefits of its sister arc product, incorporating them into an LED alternative enhanced by extra functionalities including instant on/off, variable power and low temperature operation. A ready-to-go turnkey solution that is simple to integrate with no additional parts required, the MZero LED is highly user-friendly, with a plug-and-play lamp […]

ITL unveils key new product launch for wide format graphics sector

UK UV technology developer Integration Technology Ltd (ITL) has introduced an LED variant to its heritage SubZero UV lamp range providing class leading high power output for an air-cooled system. A dedicated curing system for wide format inkjet printers, the new Subzero LED offers ground-breaking performance for air-cooled LED technology combined with the architectural pedigree, features and benefits of the UK-based company’s 2005 launched SubZero UV lamp range. Key features align the brand’s reduced footprint, low weight and field serviceability, with a curing ability previously only achievable using water cooled LED systems. Two years in development, the SubZero LED offers six model sizes from 60mm up to 210mm all achieving […]

Flat Panel Display sector growth for ITL

First quarter output at Integration Technology Ltd (ITL) has been boosted by continued strengthening of the company’s share of flat panel display-based technology markets. ITL Korea is expanding its contract to supply bespoke UV LED arrays to consumer electronics products makers. The company has recently supplied more than 30 UV LED systems to one of the country’s electronics giants, LG, while Samsung has also taken delivery of a large highly sophisticated UV LED system as part of an undisclosed micro –electronics project. Business Development manager Lewis Yun from ITL Korea attributes this success “…to ITL’s ability to deliver a project driven custom solution, including fully clean room compatible products. Some […]

Integration Technology writes the book on UV LED technology

Integration Technology writes the book on UV LED technology Pioneering UV curing systems developer, Integration Technology Limited (ITL) has published a comprehensive expert guide to UV LED technology. “The UV LED Handbook” covers a broad range of relevant topics spanning the basics of UV curing and UV chemistry, to health and safety, system integration, LED measurement, costs and economics.  The book also features chapters on the evolution and history of LEDs, how an LED works, and how UV LEDs are manufactured. The 150-page guide, which debuts at the RadTech UV&EB Technology Conference and Exposition, April 30 through May 2, 2012, is authored by ITL General Manager – North America Jennifer […]

Integration Technology and Lumen Dynamics to cross-license UV LED curing rights

Two key players in the global ultra-violet light-emitting diode (UV LED) curing market have entered into a cross-licensing of intellectual property (IP) patents enabling each access to the other’s sales territories. Patents held by UK-based Integration Technology Ltd (ITL) and Canadian-based developer Lumen Dynamics Group Inc. are to be cross-licensed, enabling ITL products entry to the US market and Lumen Dynamics access to its European counterpart. Integration Technology Limited (ITL) is a world pioneering designer and developer of ultra-violet curing solutions for wide format inkjet printing, static head inkjet, industrial applications, and various new emerging technologies. Lumen Dynamics Group Inc. (formerly Exfo) is a global leader of innovative specialty light […]

UV LED Curing Association Publishes First UV LED Glossary of Terms

December 13, 2011 – UV LED Curing Association publishes its inaugural UV LED Glossary of Terms. This is the organization’s first major accomplishment since founders Integration Technology Limited, Lumen Dynamics, and Phoseon Technology announced the formation of the association just one month ago. The three companies are diligently working to define and establish agreed-upon UV LED-based guidelines for UV LED curing applications. The founders believe the association’s work will have a positive impact towards enabling the adoption of UV LED technology within the printing, coating, and adhesive industries. The UV LED Glossary of Terms provides a consolidated list of curing terminology specific to ultraviolet (UV) light emitting diodes (LEDs) and […]

The New UV LED Curing Association

Market Leading Companies Combine Efforts to Support Rapid Growth in UV LED Applications November 8, 2011 – Integration Technology Limited, Lumen Dynamics, and Phoseon Technology join together to form the UV LED Curing Association. The new association has been established to address a growing need within the market for current and potential researchers, suppliers, integrators and end users to gain a better understanding about UV LED technology and the significant benefits it brings to numerous applications. The UV LED Curing Association is focused on providing greater insight into the various UV LED solutions currently in the marketplace, as well as into developing applications which are well suited to the technology. […]